基于qPCR和LAMP技术的马铃薯晚疫病菌快速检测方法

马铃薯晚疫病菌（Phytophthora infestans）能侵染多种茄科植物,它引起的马铃薯晚疫病,是马铃薯生产中的第一大病害。为了开发能在田间快速检测马铃薯晚疫病病原的方法,利用P. infestans T30-4基因组测序数据的contig 1.18131,设计qPCR和LAMP引物,优化扩增条件后得到引物的特异性和灵敏度,最后通过检测田间收获薯块,比较形态学传统方法、qPCR及LAMP的差异。特异性检测结果发现,qPCR和LAMP仅在含有P. infestans DNA模板的体系有阳性扩增,在寄主和其他微生物DNA中均无扩增;在优化的条件下,qPCR和LAMP的检测下限可达1×10 ^-6ng/μL,在有寄主和其他微生物DNA存在的条件下,引物的灵敏度没有显著差异。利用两种快速方法对在大理、丽江及昆明3个地区田间收获薯块上检测发现,qPCR和LAMP方法得到的检出率差异极为不显著（P=0.420）,两种快速检测方法和形态学鉴定方法检出率差异极显著（P=0.009）。在大理、丽江及昆明3个地区的薯块中,两种分子检测方法检出率均比形态学方法高。其中,qPCR检测方法比形态学方法分别提高了12.00%、2.00%、8.70%;LAMP检测方法比形态学方法分别提高了11.30%、2.00%、8.70%。     

Exogenous application of allelopathic water extracts helps improving tolerance against terminal heat and drought stresses in bread wheat (Triticum aestivum L. Em. Thell.)

The allelopathic water extracts (AWEs) may help improve the tolerance of crop plants against abiotic stresses owing to the presence of the secondary metabolites (i.e., allelochemicals). We conducted four independent experiments to evaluate the influence of exogenous application of AWEs (applied through seed priming or foliage spray) in improving the terminal heat and drought tolerance in bread wheat. In all the experiments, two wheat cultivars, viz. Mairaj‐2008 (drought and heat tolerant) and Faisalabad‐2008 (drought and heat sensitive), were raised in pots. Both wheat cultivars were raised under ambient conditions in the wire house till leaf boot stage (booting) by maintaining the pots at 75% water‐holding capacity (WHC). Then, managed drought and heat stresses were imposed by maintaining the pots at 35% WHC, or shifting the pots inside the glass canopies (at 75% WHC), at booting, anthesis and the grain filling stages. Drought stress reduced the grain yield of wheat by 39%–49%. Foliar application of AWEs improved the grain yield of wheat by 26%–31%, while seed priming with AWEs improved the grain yield by 18%–26%, respectively, than drought stress. Terminal heat stress reduced the grain yield of wheat by 38%. Seed priming with AWEs improved the grain yield by 21%–27%; while foliar application of AWEs improved the grain yield by 25%–29% than the heat stress treatment. In conclusion, the exogenous application of AWEs improved the stay green, accumulation of proline, soluble phenolics and glycine betaine, which helped to stabilize the biological membranes and improved the tolerance against terminal drought and heat stresses.     

Comparing the behavioural thermoregulation response to heat stress by Atlantic salmon parr (Salmo salar) in two rivers

Climate change is expected to increase the frequency and magnitude of extreme thermal events in rivers. The Little Southwest Miramichi River (LSWM) and the Ouelle River (OR) are two Atlantic salmon (Salmo salar) rivers located in eastern Canada, where in recent years, water temperatures have exceeded known thermal limits (~23°C). Once temperature surpasses this threshold, juvenile salmon exploit thermal heterogeneity to behaviourally thermoregulate, forming aggregations in coolwater refuges. This study aimed to determine whether the behavioural thermoregulation response is universal across rivers, arising from common thermal cues. We detailed the temperature and discharge patterns of two geographically distinct rivers from 2010 to 2012 and compared these with aggregation onset temperature. PIT telemetry and snorkelling were used to confirm the presence of aggregations. Mean daily maximum temperature in 2010 was significantly greater in the OR versus the LSWM (p = 0.005), but not in other years (p = 0.090–0.353). Aggregations occurred on 14 and 9 occasions in the OR and LSWM respectively. Temperature at onset of aggregation was significantly greater in the OR (T_onset = 28.3°C) than in the LSWM (T_onset = 27.3°C; p = 0.049). Logistic regression models varied by river and were able to predict the probability of aggregation based on the preceding number of hours >23°C (R² = 0.61 & 0.65; P₅₀ = 27.4°C & 28.9°C; in the OR and LSWM respectively). These results imply the preceding local thermal regime may influence behaviour and indicate a degree of phenotypic plasticity, illustrating a need for localised management strategies.     

无源蓄冷控温运输箱设计与试验

针对蓄冷运输箱信息化程度低、控温时间短、控温困难等问题,设计了一款集控温、远程监控、定位、故障诊断等功能于一体的蓄冷运输箱。以脐橙为试验对象,结合能耗模型,对蓄冷控温箱控温性能进行了研究。结果表明,箱内各截面温度不均匀系数分别为0.38、0.47、0.78,温度极差最大值为2.8℃,均匀性较好;当蓄冷剂用量为180 kg,预冷脐橙660 kg,在外部环境平均温度26.39℃的条件下,总控温时长为122 h,风机共执行控温21次,且随着蓄冷量减少,风机开启控温所用时间呈指数上升趋势,决定系数不小于0.928 0;结合能耗模型分析得出,该箱体在广州夏季高温环境下可控温5 d以上,能够满足远距离运输要求。     

Sorghum extrusion process combined with biofortified sweet potato contributed for high iron bioavailability in Wistar rats

This study aimed to evaluate the effect of sorghum and sweet potato on the bioavailability of iron, gene expression of proteins involved in iron metabolism and the plasma antioxidant capacity in animals fed with whole sorghum grains processed by dry heat or extrusion, combined or not with sweet potato flour with high content of carotenoids. Five experimental groups were tested (n = 7): dry heat sorghum flour (DS); extruded sorghum flour (ES); whole sorghum flour + sweet potato flour (DS + SP); extruded sorghum flour + sweet potato flour (ES + SP) and positive control (FS). The evaluations included: hemoglobin gain, hemoglobin regeneration efficiency, gene expression of divalente metal transporter 1 (DMT-1), duodenal citochroma B (DcytB), ferroportin, hephaestin, transferrin and ferritin and total plasma antioxidant capacity (TAC). The ES + SP group showed higher (p < 0.05) expression of DcytB, ferroportin and hephaestin when compared to the control group. The DS group showed high (p < 0.05) expression of DMT-1 and the ES showed high mRNA expression of transferrin and ferritin. The changes in the sorghum physicochemical properties from extrusion process reduced the iron and phytate content, and increased the gene expression of proteins involved in iron metabolism, improving iron bioavailability. The combination of sweet potato and sorghum flour (dry or extruded) improved the iron capture and total antioxidant capacity, probably due to the presence of β-carotene and antioxidant compounds.     

Effect of chlorogenic acid on intestinal inflammation,antioxidant status,and microbial community of young hens challenged with acute heat stress

Heat stress in poultry is deleterious to productive performance. Chlorogenic acid (CGA) exerts antibacterial, anti-inflammatory, and antioxidant properties. This study was conducted to evaluate the effects of dietary supplemental CGA on the intestinal health and cecal microbiota composition of young hens challenged with acute heat stress. 100-day-old Hy-line brown pullets were randomly divided into four groups. The control group (C) and heat stress group (HS) received a basal diet. HS + CGA₃₀₀ group and HS + CGA₆₀₀ group received a basal diet supplemented with 300- and 600-mg/kg CGA, respectively, for 2 weeks before heat stress exposure. Pullets of HS, HS + CGA₃₀₀, and HS + CGA₆₀₀ group were exposed to 38°C for 4 h while the control group was maintained at 25°C. In this study, dietary CGA supplementation had effect on mitigate the decreased T-AOC and T-SOD activities and the increasing of IL-1β and TNFα induced by acute heat stress. Dietary supplementation with 600 mg/kg CGA had better effect on increasing the relative abundance of beneficial bacterial genera, such as Rikenellaceae RC9_gut_group, Ruminococcaceae UCG-005, and Christensenellaceae R-7_group, and deceasing bacteria genera involved in inflammation, such as Sutterella species. Therefore, CGA can ameliorate acute heat stress damage through suppressing inflammation and improved antioxidant capacity and cecal microbiota composition.     

水平连续铸钢凝固过程数值模拟

本文在分析水平连铸传热特征的基础上，给出了一维情况下，计算结晶器出口处铸坯凝固层厚度的解析式，建立了计及轴向传热的连续坯凝固模拟模型。进行了连续坯二维传热的凝固数值模拟，其模拟结果与实验结果吻合较好，具有普遍应用价值。     

烘丝温度和时间对生丝机械性能的影响

从刚落下的丝片上摇取小绞丝,分别在25—180℃和30、60、90min下进行干热处理后,测定其机械性能。结果表明:在90—100℃、30—60分钟时,生丝的强伸力、初始模量以及抱合等机械性能都较好,烘丝温度太高,时间太长都会对生丝机械性能产生不良的影响。     

金属热防护系统多层隔热材料的传热分析及参数优化

采用能量平衡方程和离散坐标法近似地建立了金属热防护系统多层隔热材料的一维稳态传热的数学模型，并利用遗传算法和纤维隔热材料的有效导热系数试验数据求解传热反问题，从而得到了模型中的纤维隔热材料的辐射衰减系数、反照率和隔热屏表面辐射发射系数。最后，由实验测得了多层隔热材料的有效导热系数，验证了采用优化参数后，多层隔热材料的传热模型的正确性。